The Many Features of a Knuckle Boom Crane

US Crane
4 min readJul 6, 2021

--

When it comes to knuckle boom cranes and boom trucks, which option can be more difficult than others? While there are numerous reasons to pick either a particular type of crane, it most often comes down to an individual buyer s specific and desired work uses. The knuckle boom crane is extremely popular in applications from construction to maintenance to offshore oil rig work. And the boom truck is used for a wide variety of jobs including everything from road construction to demolition to bridgework and much more.

Both cranes can lift heavy cargo, but there are differences between the lifting capacity and operating styles. The knuckle boom crane is generally considered the best overall choice because of its versatility, ease of operation, and ability to handle both elevated and ground loads. Boomers are known for their high level of reliability and dependability, but the knuckle boom loader crane has been proven time again to perform in any working setting. With the right lifting capacity, durability, and the ability to handle nearly any type of load, the cranes offer ideal service in just about any job site.

The lifting capacity refers to the number of tons that the loader cranes can lift and the operating weight limit for the vehicle in question. This doesn’t always mean the largest amount of heavy cargo that can be lifted; rather, it simply means that the crane can lift the most amount of weight as is needed. It is important to remember that the combination of load factors, such as the height of the load, the distance to the ground, and the angle of the load can all affect the lifting ability of a crane.

The straight boom crane is a little more commonplace, especially in the commercial market. These units can usually lift larger loads due to their ability to reach longer distances between platforms, and their ability to remain fixed in place. While they can also handle loads that surpass their shoulder limits, they are limited by the limitations of the earth. The knuckle boom crane, on the other hand, is designed with a much shorter reach, often no more than ten or twelve feet between platforms. Because of this shorter maximum range, they are often used in smaller building sites and as such is perfect for lighter loads.

As previously mentioned, companies that specialize in the construction market will have access to Knuckle boom cranes. Many companies specialize in providing these products to contractors and other industries. The fact that there is a company that specializes in providing knuckle boom crane makes the choice easier for companies, as they can get all of the information they need for the specific job at hand.

One of the most common uses of the knuckle boom crane is the lifting of heavy loads. It’s the ability to raise loads that sets it apart from other types of similar construction equipment. A knuckle boom crane will have a much greater payload capacity and will be able to move much heavier loads than other crawler loaders. This allows them to be used for much larger jobs, such as bridges and other structures that require the use of large trucks. The size of the load that can be lifted using this loader is limited only by the size of the truck being used, the quality of the truck, and the weight of the materials being lifted.

In addition to the ability to lift larger loads, some knuckle boom cranes will also feature a swivel head that allows the loader to tilt the head up and down. This is great for getting closer to objects that are taller than you normally would be able to. However, the drawback to these swivels is that they do not fully protect against any obstacles in the area. Some of the cranes that feature these swivels do so with a hinge. This means that when the crane is raised high enough, it becomes very difficult to raise it without lifting the entire crane off the ground.

Knuckle boom cranes will typically feature articulating boom arms that are used in combination with either a straight boom crane arm or a counterweight. An articulating boom crane arm will allow the crane to bend around at different angles and will allow the loader to change the angle of attack depending on the job at hand. The counterweight will help to balance the load while it’s being lifted, which is especially useful when a lighter crane is needed, or when several loaders are needed on a single job. There are literally hundreds of different designs for knuckle boom cranes available, and all of them will have their own unique set of features. The choice of which one to purchase will depend a great deal on exactly what you’re looking to use it for.

--

--

US Crane
US Crane

Written by US Crane

0 Followers

Our machinery movers provide high quality crane and rigging services, plant relocation, trucking and warehousing to both private clients and public sector.

No responses yet